Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Bruno, CA
Gate installation in San Bruno means working with fog-belt moisture, steep hillside lots, and ground that shifts along the San Andreas Fault zone. We install automatic and manual gates on post-WWII ranchers near El Camino and on steep-lot homes in the hills, where redwood and cedar fences have spent decades absorbing coastal damp. The job is rarely just bolting on hardware. It means setting posts that stay plumb, choosing hardware that tolerates seasonal wood movement, and wiring automation that keeps working through wet winters. Call Gate Repair Crocker-Amazon at (833) 842-7897 for a free measure and written price.
Why San Bruno Homes Are Different
San Bruno’s gate work is shaped by three things: the fault zone, the fog, and the age of the fencing. The city sits directly on the San Andreas Fault, and even minor seismic settling knocks posts out of plumb. When a gate drags or binds, the first thing we check is not the hinges. It’s whether the post has moved. This is especially true on hillside properties where fences rack across slopes. In the flatlands near San Bruno Park and around the older stucco-and-wood ranchers, clay soils hold winter moisture and heave posts slowly upward. A gate that dragged every January but swung fine by August was never a hinge problem. It was ground movement.
The fog belt south of San Francisco means cool, damp summers and wet winters. Wood gates swell in the damp, then shrink in dry spells. Steel hardware rusts faster here than inland. Many San Bruno fences are original redwood or cedar from the post-war building boom, which means the posts themselves are often the weak point. Repairs frequently involve resetting aging posts in concrete rather than swapping out hardware. New installations need to account for all of this from day one: post depth, drainage around the footing, and gate frames built to tolerate the seasonal expansion cycle without binding.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main San Bruno Services
San Bruno homeowners call us most about two things: gates that have stopped swinging or sliding correctly, and electric gates that have stopped responding. Each has its own dedicated San Bruno page.
Gate Repair in San Bruno
Mechanical gate repair in San Bruno usually starts with a post check, not a hinge swap. After a wet winter or a small quake, posts heave and gates drop, which is why so many flatland gates drag near San Bruno Park. We re-set posts, re-hang gates, replace rusted hardware, and correct racking on slopes. On older redwood and cedar gates, we often rebuild latch-side stiles instead of replacing the whole gate. For the full scope of what we handle, see Gate Repair in San Bruno.
Electric Gate Repair in San Bruno
Electric gates in San Bruno fail in predictable ways: damp corrodes control board connections, loop detectors drift with soil moisture, and motors strain when a swollen gate binds. We diagnose the whole system, not just the visible mechanical damage. That means checking motors, boards, safety loops, and access-control hardware together. If the problem is a LiftMaster or FAAC operator acting erratically, we test before we replace. Read the full breakdown on Electric Gate Repair in San Bruno.
Gate Installation in San Bruno
Gate installation in San Bruno is a post-first job. On hillside lots and flatland clay alike, the difference between a gate that lasts ten years and one that binds in two is what happens below grade. We install new automatic and manual gates with post footings sized for wet, shifting soil, hardware rated for coastal corrosion, and gate frames built to move with the wood rather than fight it. Most San Bruno installations are measured, quoted, and scheduled, not dispatched same day. We survey the site, check for underground utilities, and write a price before any work starts. That’s the same full-lifecycle service we describe on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a gate, or you need controlled access for a driveway, rental property, or commercial entry.
What it costs in San Bruno
Automatic gate installation in San Bruno typically runs $1,800 to $5,500 depending on operator type and gate size.
How we do it
We set and plumb the posts, hang the gate, mount the operator, run power and safety loops, and program remotes and keypads before showing you how it all works.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging beyond repair, or you’re adding a gate to a driveway that never had one.
What it costs in San Bruno
Driveway gate installation in San Bruno typically runs $1,500 to $4,800 for a single swing or slide gate with hardware and posts.
How we do it
We measure the opening, dig and pour footings, build or mount the gate frame, then install hinges, latch, and any automation you choose.
Sliding Gate Installation
Signs you need it
Your driveway slopes or has limited swing clearance, so a sliding gate is the only configuration that works.
What it costs in San Bruno
Sliding gate installation in San Bruno typically runs $2,200 to $5,800 including track, gate, motor, and safety edges.
How we do it
We pour a level track base, set the guide rollers and motor mount, install the gate and toothed rack, then wire in the operator and safety sensors.
What Gate Installation Costs in San Bruno
| Item | Typical range in San Bruno |
|---|---|
| Manual swing gate with posts and hardware | $900 – $2,400 |
| Automatic gate operator (motor, board, remotes) | $1,100 – $2,800 |
| Full automatic gate system with installation | $1,800 – $5,500 |
Does a new gate need a permit in San Bruno?
Most residential gate replacements don’t require a permit, but new driveway gates with automation can trigger city requirements for safety loops and clearances. We check San Bruno’s current rules before quoting and handle the paperwork when needed.
Can you replace just the gate and keep my existing opener?
Often yes. If your operator is still sound and compatible with the new gate’s weight and travel, we can reuse it and only replace the gate and hardware. We’ll tell you during the measure if the operator is worth keeping.
Brands We Service in San Bruno
We work on LiftMaster, FAAC, BFT, and Linear systems in San Bruno, which covers most residential and commercial operators you’re likely to find here. Because we service these brands regularly, we stock common boards, remotes, and safety parts locally. That means fewer return trips waiting on parts. See our brands for the full range we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Bruno, CA
| Service | Typical range in San Bruno |
|---|---|
| Gate post reset and re-hang | $250 – $650 |
| Manual gate hardware replacement | $150 – $500 |
| Automatic opener repair (motor/board) | $350 – $1,100 |
| Loop detector replacement | $300 – $700 |
| Manual swing gate with posts and hardware | $900 – $2,400 |
| Automatic gate operator | $1,100 – $2,800 |
| Full automatic gate system | $1,800 – $5,500 |
| Sliding gate system installed | $2,200 – $5,800 |
In San Bruno, prices push higher when posts have heaved and need new concrete footings, when the gate is on a steep slope that makes leveling difficult, or when corrosion has spread into the gate frame itself. Every job is quoted and agreed before we start work, so the number on the estimate is the number on the invoice.
Neighborhoods We Serve in San Bruno
We work across San Bruno, from the flats near El Camino Real up into the hillside streets where driveways climb and gates rack with the slope. Most calls get a same-week visit, and emergency gate failures are scheduled first.
- San Bruno Park area
- Portola Highlands
- Crestmoor
- Millbrae Meadows border
- Rollingwood
Service Area – Cities Near San Bruno
Gate Repair Crocker-Amazon is based in Crocker-Amazon, CA and serves San Bruno and the surrounding peninsula. We also work regularly in South San Francisco, CA, Excelsior, CA, and Outer Mission, CA. If your gate is acting up and you’re nearby, call us and we’ll let you know how soon we can be there.
Serving San Bruno, CA – Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bruno
For a gate that won’t close or a driveway blocked open, we prioritize the call and typically reach San Bruno the same day or next morning. Non-emergency repairs and new installations are scheduled within the week. Call (833) 842-7897 and we’ll give you a straight answer.
Some planned communities and condo associations in San Bruno do have design or height rules for gates, especially on visible street frontages. We can work from your HOA’s specs and submit any drawings they need. Bring us the guidelines and we’ll match them.
Yes. We carry full licensing and insurance for gate installation and repair work across San Bruno and the peninsula. All work is quoted up front, and nothing starts until you’ve approved the price in writing.
Call Gate Repair Crocker-Amazon at (833) 842-7897 for a free measure and written estimate on any gate job in San Bruno.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What San Bruno Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Amanda Quinn"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Sofia Rodriguez"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Diego Castillo